Conveyor C-series
AVD series vacuum powder suction machine is mainly used for powder conveying occasions such as food, chemical industry, plastic...etc. The hopper and the main machine are designed separately, and the pressure is accumulated through the air during the completion of each powder suction process. Filter, jet backwash filter, instantly shake off the dust, and maintain a good powder absorption effect at any time. Excellent equipment that absolutely reassures customers.
-
- Length: 2000mm
- Width: 300mm
- Height: 900~1250mm
- Power: 60w
- Voltage: 110v or 220v
- Speed: 0~8m/min
- Weight: 30kg
CA-2000
-
- Length: 500*1500mm
- Width: 300mm
- Height: 250*1150mm
- Power: 60w
- Voltage: 110v or 220v
- Speed: 0~8m/min
- Weight: 42kg
CB-2000
-
- Length: 800*1700mm
- Width: 300mm
- Height: 900*1250mm
- Power: 60w
- Voltage: 110v or 220v
- Speed: 0~8m/min
- Weight: 45kg
CC-2500
-
- Length: 400*1500*600mm
- Width: 300mm
- Height: 250*1150mm
- Power: 90w
- Voltage: 110v or 220v
- Speed: 0~8m/min
- Weight: 48kg
CD-2500
-
Rotary Board Separation Conveyor
To installed a rotary board at the bottom of conveyor, the gap between board and belt can be adjustable, against this cap to separate material and runner.
-
Rotary Separation Conveyor
Installed two rotary wheel at the bottom of conveyor, both rotary can be adjustable for the gap to separate the material and runner.
-
Slope Conveyor By Board
-
Rotary Conveyor Without Power
此機型採用自滑性滾輪，可借滾輪滾動輸送物品。
-
Conveyor With Metal Detector
Metal detector was be set up on the conveyor to avoid metal be delivery into the crusher.
-
Conveyor With Nylon Net
This type is adopt Nylon belt to reduce the dusty during trnasfer.
-
Static Electricity Eliminate Conveyor
This type set up the static electricity eliminate function to remove the few dusty during delivery.
-
Angle Adjustable Conveyor
this type can adjust the angle of slope, can be adjustalbe between 30°~40°.